Válaszd ki a küldemény kiszállítási országát

Újdonság

MusicNomad MN805 Fret Shield Gitár karbantartó eszköz

Termékkód: 1313181

Újdonság
MusicNomad MN805 Fret Shield Gitár karbantartó eszköz

Termékkód: 1313181

23 090 Ft
Megrendelésre
A szállítási határidőt a beszállítótól történő megrendelést követően pontosítjuk.
Megpróbáljuk beszállítani a készletünkre a megrendelt árut, és felvesszük Veled a kapcsolatot a szállítási határidővel kapcsolatban.
Gitár karbantartó eszköz MusicNomad MN805 Fret Shield Gitár karbantartó eszköz

MusicNomad MN805 Fret Shield Gitár karbantartó eszköz

23 090 Ft
The MusicNomad MN805 Fret Shield is a stainless steel fretboard protector guard sized for 34-inch-scale bass guitars. It replaces masking tape during fret polishing, leveling, and crowning jobs, snapping onto the fingerboard in seconds and held in place by included rubber bands. Designed for 34" bass scale with up to 24 frets, fits both 4- and...

MusicNomad MN805 Fret Shield Gitár karbantartó eszköz

The MusicNomad MN805 Fret Shield is a stainless steel fretboard protector guard sized for 34-inch-scale bass guitars. It replaces masking tape during fret polishing, leveling, and crowning jobs, snapping onto the fingerboard in seconds and held in place by included rubber bands.

  • Designed for 34" bass scale with up to 24 frets, fits both 4- and 5-string basses
  • .008" (0.20 mm) stainless steel construction is burr-free and lasts hundreds of polish jobs
  • Formed drop-down edges let rubber bands secure the shield and conform it to your fingerboard radius
  • This accessory works seamlessly with power buffing wheels, polishing pads, and steel wool without damaging the wood.
További leírás még nem elérhető az Ön nyelvén. Addig is lehet, hogy segít az angol leírás.

Reusable Fretboard Protector for 34" Bass Scale

The MusicNomad MN805 Fret Shield is a stainless steel fretboard protector guard for 34-inch-scale bass guitars. Instead of taping off a fingerboard before every polish, this guard drops onto the neck in seconds and stays put with included rubber bands. The MN805 is the right tool for bass players and techs who want clean fret work without risking scratches on rosewood or maple boards.

Why It Beats Tape

At 0.20 mm thick, the stainless steel reaches the full height of the fret crown while shielding the wood. Drop-down edges keep the rubber bands below the polishing surface, and a built-in hang hole stores the shield on the tool board.

  • Material: Stainless steel — burr-free, reusable for hundreds of jobs
  • Thickness: 0.20 mm — reaches fret base to crown
  • This shield is designed for 34" bass guitars, supporting both 4- and 5-string models with up to 24 frets.

Dokumentumok

Biztonsági utasítások

A termékre vonatkozó biztonsági utasításokat lásd a használati útmutatóban.