A Muzikernél a sütiket arra használjuk, hogy a látogatásod nálunk mindig kellemes élmény legyen. Az "Egyetértek" gombra kattintva hozzájárulhatsz az összes cookie használatához, vagy a beállításoknál kiválaszthatod csak az általad kívántakat.
Bővebben.
Features Low-profile mic design for minimum visibility Crisp, clear, well-balanced microphone response, even at high SPLs Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source UniMount® universal clip-on mount attaches securely to instrument bell and provides excellent shock resistance for the microphone Rugged UniMount® 9" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise Interchangeable elements available for hypercardioid and omnidirectional polar patterns Included violin mount with hook-and-loop fastener provides an additional mounting option
Specs Element Fixed-charge Back Plate, Permanently Polarized Condenser Polar Pattern Cardioid Frequency Response 40 – 20,000 Hz Low Frequency Roll-off 80 Hz, 12 dB/octave Open Circuit Sensitivity –49 Db (3.5 Mv) Re 1v At 1 Pa Impedance 200 Ohms Maximum Input Sound Level 159 dB SPL, 1 Khz At 1% T.H.D. Dynamic Range (Typical) 130 dB, 1 Khz At Max SPL Signal-to-noise Ratio 65 dB, 1 Khz At 1 Pa Phantom Power Requirements 11– 52V DC, 3.5 Ma Typical Switch Flat, Roll-off Weight (Microphone) 14.5 g (0.5 Oz) Weight (Power Module) 90 g (3.2 Oz) Dimensions (Microphone) 37.8 mm (1.49'') Long, 12.2 mm (0.48'') Maximum Body Diameter Dimensions (Power Module) 92 mm (3.62") Long, 18.9 mm (0.74") Diameter Cable (Permanently Attached To Microphone), 3.2 mm (0.13") Diameter, 2-conductor Shielded Cable With Hirose Hr10-type Connector
Vízi sportok
Sport
hu
